Last time, I thought I had solved my encounter problem, but thinking about it today I wasn't so sure. I spent some time trying to combine encounters, or find a way to make meaningful yet fast encounters happen, and I just ran into walls. I wanted to build the encounters to force the party to move quickly and limit rest periods. I was imagining combining multiple encounters worth of XP into a single superencounter, and coming up with alternate systems to allow PCs to recover surges without taking an extended rest. They all seemed so clunky. I tried to model the dungeon navigation as a skill challenge with similar clunky results.
Ultimately I got frustrated and decided to scrap that plan and approach the problem from a different angle, just to get a different perspective on the situation and get my creative juices flowing. To do that, I made a schematic block diagram of the dungeon. As shown below, it shows how the rooms connect to each other, and lists important information about the flow of the adventure without getting bogged down in the cartography of the dungeon itself.
This layout made it easy for me to see the optimal path through the dungeon. I was worried that a party would have to face 12 or more encounters in order to succeed. I was wrong. The critical path through the dungeon only has 4 encounters in it! A clever and cautious party could get in, save the slaves, and get out along a very short path. If they linger too long, or engage too much of the opposition they will draw a lot of attention to themselves and fail. That's okay. The narrative elements of the mod should encourage this type of play. The players will know that they have a very limited time frame to complete this mission, and they should know that failure is possible.
Instead of trying to combine encounters and make it possible for the party to face every encounter within the allotted time, I am going to stat out ALL the encounters with the understanding that they will NOT be able to face all of them. If they run headlong into every room with swords swinging, they will probably die. If they do a little bit of recon and try to avoid unnecessary encounters, they have a chance to succeed.
In preparation for the next step of the process, actually choosing individual monsters, I have made two lists. One list shows each room, the target level of the encounter and the XP budget. Another list shows the types of monsters in the original mod with lists of Dark Sun appropriate monsters to use for my conversion.
Showing posts with label conversion. Show all posts
Showing posts with label conversion. Show all posts
Thursday, September 8, 2011
Sunday, March 27, 2011
Converting A1-Slave Pits of the Undercity -part 2
Last time, I was setting my overall parameters for the design of this mod. I determined that I would need to cut or combine encounters to fit the mod in a reasonable amount of play time. Today, I'm using going through the mod in detail to determine which encounters to convert directly, which encounters to combine and which encounters to cut.
To do this, I printed out the map of the dungeon and made brief notes on each room about what it contained. That gives me a quick, 'at-a-glance' overview of the mod without me flipping back and forth through the whole thing. The first thing I noticed when I did this is that there are way more encounters in the mod than I thought! From the description and my brief reading, I was planning on having to cut from 18 encounters down to 12 or 14. My new count has upwards of 24 encounters! What to do?
Further analysis of the map shows that there are multiple paths through the dungeon, and it is possible for a clever party to miss entire sections of it. That will let me include a few extra encounters, because a party won't necessarily face all of them. I'll say that taking the multiple paths into account will allow me to include about 18 total encounters, hoping that a party will only encounter 3/4 of them.
That still leaves me with a few too many encounters. To make the first round of cuts, I'm going to use some tricks I learned playing a conversion of the original Ravenloft adventure a few weeks ago. The DM had converted some of the single monster encounters, which in earlier versions of D&D would have represented a legitimate challenge for a party, into an effect more like a trap. For example where the original module called for a banshee to appear, instead of running an entire fight against a single banshee, the banshee made a single wailing attack against us all and then disappeared back into the mists. This saved time at the table, maintained the fast pace of the original, and still had an impact on the PCs. There are a few encounters of this type in A1, so I'll convert them to an effect like a trap (some ideas: a group of archers fires a volley then retreats to another position, a group of monsters rush the party and deal some damage even as they are cut down).
Still a few encounters over, I turn next to combining encounters. In earlier editions of the game, encounters with a handful of weak enemies were common. The 4e equivalent would be to happen upon a group of minions. In 4e, running all of those individual fights would take too long, and not be interesting enough to be worth spending time on at the table. Without giving too much away, I can say that there are several areas in the original mod that list encounter statistics for rooms like this that are very close together, and that for my purposes I will treat these thematically linked mini-encounters together into a larger encounter. Basically, I will use a suite of rooms as the area instead of a single room.
That brings me down to my magic number. Now I'll need to convert the remaining encounters to the new rules and away we go. Stay tuned.
To do this, I printed out the map of the dungeon and made brief notes on each room about what it contained. That gives me a quick, 'at-a-glance' overview of the mod without me flipping back and forth through the whole thing. The first thing I noticed when I did this is that there are way more encounters in the mod than I thought! From the description and my brief reading, I was planning on having to cut from 18 encounters down to 12 or 14. My new count has upwards of 24 encounters! What to do?
Further analysis of the map shows that there are multiple paths through the dungeon, and it is possible for a clever party to miss entire sections of it. That will let me include a few extra encounters, because a party won't necessarily face all of them. I'll say that taking the multiple paths into account will allow me to include about 18 total encounters, hoping that a party will only encounter 3/4 of them.
That still leaves me with a few too many encounters. To make the first round of cuts, I'm going to use some tricks I learned playing a conversion of the original Ravenloft adventure a few weeks ago. The DM had converted some of the single monster encounters, which in earlier versions of D&D would have represented a legitimate challenge for a party, into an effect more like a trap. For example where the original module called for a banshee to appear, instead of running an entire fight against a single banshee, the banshee made a single wailing attack against us all and then disappeared back into the mists. This saved time at the table, maintained the fast pace of the original, and still had an impact on the PCs. There are a few encounters of this type in A1, so I'll convert them to an effect like a trap (some ideas: a group of archers fires a volley then retreats to another position, a group of monsters rush the party and deal some damage even as they are cut down).
Still a few encounters over, I turn next to combining encounters. In earlier editions of the game, encounters with a handful of weak enemies were common. The 4e equivalent would be to happen upon a group of minions. In 4e, running all of those individual fights would take too long, and not be interesting enough to be worth spending time on at the table. Without giving too much away, I can say that there are several areas in the original mod that list encounter statistics for rooms like this that are very close together, and that for my purposes I will treat these thematically linked mini-encounters together into a larger encounter. Basically, I will use a suite of rooms as the area instead of a single room.
That brings me down to my magic number. Now I'll need to convert the remaining encounters to the new rules and away we go. Stay tuned.
Sunday, March 6, 2011
Converting A1-Slave pits of the Undercity - Part 1
This is the first in a series of posts about my process updating A1-Slave Pits of the Undercity for use in 4e D&D. I'll be explaining how I approach the process as I go along. To be clear, I'll be writing about how I work, not about how I think everyone should work. Your mileage may vary. Let's get to it.
Converting a mod is kind of a big project, so to make it more manageable, I’m going to break it into steps. The first step of any project should be to clearly define the end goal. Here is how I went about defining my goals for the conversion.
Here are the requirements that I set for myself:
To boil that down to defining the scope of this project, I’ll go through my lists and try to make them fit together.
Run-time
I assume that a well-balanced 4e party with moderately experienced players will finish 3 or 4 encounters in a 4-hour session. Optimized parties might blow through a little faster, and inexperienced players may take a little longer, but that will be my starting point. To fit comfortably into 4 sessions, I should be looking for about 12 total encounters.
Already there is a time conflict – if I directly convert all 18 original encounters, it would take a party 4-6 sessions to finish. Right off the bat I know I’ll need to either cut or combine encounters to make the mod fit into my time-frame. I haven’t decided which I’ll do, but I’ll keep that in mind as I go forward.
Level Range
In AD&D, the maximum level for a human PC was 20, so the 5-7 level range was about a third of the way through the range. In 4e terms, that translates roughly to the high heroic or low paragon tiers. I eventually want to convert all four mods in the series, so I’ll set 11th level as the target for PCs starting the fourth mod. If they gain 1 level per mod, that puts the first mod starting level at 7.
Lethality
In the original, each encounter was tough enough to kill at least one PC if the players were not careful. In 4e, lethality and pacing are linked. Tough encounters slow down play, but easy encounters are rarely a threat. However, if a party never knows when they will be able to rest and regain healing surges and dailies, even a weak enemy becomes threatening. I want the game to move along quickly so I’m going to use pace to control lethality more than encounter level. Most of the encounters should be be within one level of the party, but it should be difficult to take an extended rest.
Pace
The adventure pits the characters against a maze-like dungeon defended by a well-prepared and intelligent enemy. The players should feel the need to accomplish their goal all at once, without leaving the dungeon or taking an extended rest. If they leave the dungeon to rest and resupply, the defenses will almost certainly have been bolstered by the time they return. If they try to take an extended rest inside the dungeon, they will find that there are few places to safely do so, and it may be quite challenging to access those places. In either case I want to push them to face as much of the dungeon as possible without resting. This could be problematic for a 4e game – the rules assume that the PCs will be able to renew some of their resources every now and then, so to encourage the pace of exploration that I want, I’ll have to find a different way for PCs to recharge their daily powers and regain healing surges. I don’t know what that is yet, but I know I need to figure that out.
Flavor
This mod is a little light on story, but has a very well designed dungeon and some interesting NPCs. The dungeon looks like a really fun crawl – there are clear objectives, multiple levels, and multiple parallel paths that lead to the final objective. All of the paths are interconnected as well, making it possible for parties to run into a tough obstacle, choose to avoid it, then double back and try another route. The players should be free to overcome challenges in a variety of ways, not just by hitting things until they stop moving.
That covers my basic guidelines for the conversion going forward. Next time I am going to review each original encounter, get my XP budgets sorted out, and start designing encounters.
*Here I am using the word encounter to refer to traps, puzzles, combats, parleys, skill challenges or any other discrete unit of the story.
Converting a mod is kind of a big project, so to make it more manageable, I’m going to break it into steps. The first step of any project should be to clearly define the end goal. Here is how I went about defining my goals for the conversion.
Here are the requirements that I set for myself:
- The mod should run in 3 or 4 sessions.
- The mod should accommodate 4-6 players
- I want to maintain as much of the original ‘flavor’ of the mod as possible
- Possible contradiction: I want to move the adventure to the world of Dark Sun – some cosmetic details will need to be changed, but the main antagonist is a group of slavers which seems like a perfect fit for Dark Sun.
- I want to maintain the pace of the original mod (no 5-minute workday)
- I want to maintain the challenge of the original (character death must be a possibility)
- A1 is the first of a series of four modules
- A1 was originally a written as a competitive tournament mod
- The focus of the adventure is a dungeon crawl through a twisting, multi-leveled dungeon complex
- It was written for a party of 9 characters,
- It was written in two parts, each part having nine encounters*, with each encounter designed to be deadly enough to kill one of the characters if they players weren’t careful.
- Each part ran in a single 3 1/2 hour session, for a total of 7 play hours. Not every party was expected to face every encounter.
- The mod was printed in two places: as a standalone product and in an omnibus edition called Scourge of the Slave lords that included all four mods in the series.
- It was intended for characters of level 5-7 (AD&D)
To boil that down to defining the scope of this project, I’ll go through my lists and try to make them fit together.
Run-time
I assume that a well-balanced 4e party with moderately experienced players will finish 3 or 4 encounters in a 4-hour session. Optimized parties might blow through a little faster, and inexperienced players may take a little longer, but that will be my starting point. To fit comfortably into 4 sessions, I should be looking for about 12 total encounters.
Already there is a time conflict – if I directly convert all 18 original encounters, it would take a party 4-6 sessions to finish. Right off the bat I know I’ll need to either cut or combine encounters to make the mod fit into my time-frame. I haven’t decided which I’ll do, but I’ll keep that in mind as I go forward.
Level Range
In AD&D, the maximum level for a human PC was 20, so the 5-7 level range was about a third of the way through the range. In 4e terms, that translates roughly to the high heroic or low paragon tiers. I eventually want to convert all four mods in the series, so I’ll set 11th level as the target for PCs starting the fourth mod. If they gain 1 level per mod, that puts the first mod starting level at 7.
Lethality
In the original, each encounter was tough enough to kill at least one PC if the players were not careful. In 4e, lethality and pacing are linked. Tough encounters slow down play, but easy encounters are rarely a threat. However, if a party never knows when they will be able to rest and regain healing surges and dailies, even a weak enemy becomes threatening. I want the game to move along quickly so I’m going to use pace to control lethality more than encounter level. Most of the encounters should be be within one level of the party, but it should be difficult to take an extended rest.
Pace
The adventure pits the characters against a maze-like dungeon defended by a well-prepared and intelligent enemy. The players should feel the need to accomplish their goal all at once, without leaving the dungeon or taking an extended rest. If they leave the dungeon to rest and resupply, the defenses will almost certainly have been bolstered by the time they return. If they try to take an extended rest inside the dungeon, they will find that there are few places to safely do so, and it may be quite challenging to access those places. In either case I want to push them to face as much of the dungeon as possible without resting. This could be problematic for a 4e game – the rules assume that the PCs will be able to renew some of their resources every now and then, so to encourage the pace of exploration that I want, I’ll have to find a different way for PCs to recharge their daily powers and regain healing surges. I don’t know what that is yet, but I know I need to figure that out.
Flavor
This mod is a little light on story, but has a very well designed dungeon and some interesting NPCs. The dungeon looks like a really fun crawl – there are clear objectives, multiple levels, and multiple parallel paths that lead to the final objective. All of the paths are interconnected as well, making it possible for parties to run into a tough obstacle, choose to avoid it, then double back and try another route. The players should be free to overcome challenges in a variety of ways, not just by hitting things until they stop moving.
That covers my basic guidelines for the conversion going forward. Next time I am going to review each original encounter, get my XP budgets sorted out, and start designing encounters.
*Here I am using the word encounter to refer to traps, puzzles, combats, parleys, skill challenges or any other discrete unit of the story.
Saturday, March 5, 2011
Better late than never
So, I’m in the process of converting A1 Slave Pits of the Undercity to 4e rules for the meetup group I’ve been playing with lately. The group has been a lot of fun, and through it I’ve been introduced to a lot of classic D&D experiences that I missed out on when we were playing mostly homebrew stuff in high school and college. Back in high school, I had never heard of the Tomb of Horrors, the Temple of Elemental evil, or Castle Greyhawk. I never met Elminster in the streets of Waterdeep or fought alongside Sturm Brightblade. I didn’t read any of the novels and I didn't watch the cartoon show. We were having a blast with our own creations, and occasionally dabbled in the netbooks of traps or riddles, but nothing in our experiences tied us into the larger D&D world. Now I feel like I’m getting schooled in all of these classic mods, and I’m really loving it. Better late than never.
Wednesday, March 2, 2011
Zombie Lord Update
*Spoiler Alert* If you are playing in my home campaign right now - DON'T READ THIS.
Now that they've gone, we can get down to business. Last weekend I started to run Night of the Walking Dead for my home group. It is a small party, only 4 PCs, and two of the players are brand new to the hobby. I had a great time running this mod back in the day, and I thought it would be a good followup adventure to Into the Shadowhaunt, which I ran for the group the week before.
Updating most of the encounters was pretty easy... there are 4e versions for zombies, ghasts and ghouls, but the Big Bad of the mod is a Zombie Lord. I couldn't find a good 4e equivalent, and the 2e version's save or die aura is a big no-no these days. Unfortunately, the story of the mod hinges around villagers being killed and turned by the aura days before the PCs become aware of the Zombie Lord itself. Hmmmmm... How to update the aura?
I have two ideas for the aura, as follows:
Option 1:
Stench of Death • Aura 10 ; attacks living creatures who enter it for the first time each encounter
+10 vs Fort; target is dazed and has ongoing 5 necrotic (save ends); Aftereffect: ongoing 5 necrotic (save ends). Targets reduced to zero hit points by the aura die and rise as Tarascon Zombies in 1d4 rounds
Option 2:
Stench of Death • Aura 10 ; attacks living creatures who enter it for the first time each encounter
+10 vs Fort; target is weakened (save ends); first failed save: target is dazed (save ends); second failed save: target is stunned (save ends); third failed save: target is reduced to zero hit points and is dying and is subject to the zombie lord's curse (save ends). If the target dies while subject to the zombie lord's curse, it rises as a Tarascon Zombie in 1d4 rounds.
Other than the aura, the Zombie Lord is a typical level 2 Solo Brute, with a leader ability that lets him command his zombie minions to attack.
I'm not sure which version of the aura I'll run with. Both seem a little weak, requiring a long streak of bad rolls to actually die and rise as a zombie. Option 1 seems a little more dangerous, as the target could be damaged by other monsters and then be pushed over the edge by the aura, potentially without failing any of their saves.
The party is far from optimized, and have no powers that grant extra saves or bonuses to saves. That may change, since I expect them to level before they face the Zombie Lord. I'll post updates as events warrant.
Now that they've gone, we can get down to business. Last weekend I started to run Night of the Walking Dead for my home group. It is a small party, only 4 PCs, and two of the players are brand new to the hobby. I had a great time running this mod back in the day, and I thought it would be a good followup adventure to Into the Shadowhaunt, which I ran for the group the week before.
Updating most of the encounters was pretty easy... there are 4e versions for zombies, ghasts and ghouls, but the Big Bad of the mod is a Zombie Lord. I couldn't find a good 4e equivalent, and the 2e version's save or die aura is a big no-no these days. Unfortunately, the story of the mod hinges around villagers being killed and turned by the aura days before the PCs become aware of the Zombie Lord itself. Hmmmmm... How to update the aura?
I have two ideas for the aura, as follows:
Option 1:
Stench of Death • Aura 10 ; attacks living creatures who enter it for the first time each encounter
+10 vs Fort; target is dazed and has ongoing 5 necrotic (save ends); Aftereffect: ongoing 5 necrotic (save ends). Targets reduced to zero hit points by the aura die and rise as Tarascon Zombies in 1d4 rounds
Option 2:
Stench of Death • Aura 10 ; attacks living creatures who enter it for the first time each encounter
+10 vs Fort; target is weakened (save ends); first failed save: target is dazed (save ends); second failed save: target is stunned (save ends); third failed save: target is reduced to zero hit points and is dying and is subject to the zombie lord's curse (save ends). If the target dies while subject to the zombie lord's curse, it rises as a Tarascon Zombie in 1d4 rounds.
Other than the aura, the Zombie Lord is a typical level 2 Solo Brute, with a leader ability that lets him command his zombie minions to attack.
I'm not sure which version of the aura I'll run with. Both seem a little weak, requiring a long streak of bad rolls to actually die and rise as a zombie. Option 1 seems a little more dangerous, as the target could be damaged by other monsters and then be pushed over the edge by the aura, potentially without failing any of their saves.
The party is far from optimized, and have no powers that grant extra saves or bonuses to saves. That may change, since I expect them to level before they face the Zombie Lord. I'll post updates as events warrant.
Subscribe to:
Posts (Atom)
